White Fort Fire Shield are proud to supply highest quality, fully tested, specialist fire protection coatings, paints and varnishes which easily meet or exceed the exacting standards required by the authorities.
Our products are manufactured from the highest grade materials and use the highest industrial manufacturing standards. Our products are environmentally friendly and with clear instructions are safe and simple to apply. In many cases just one or two coats will provide the levels of protection required.
White Fort Fire Shield supply fire protection paints and coatings for hallways, stairs &common areas in schools, kitchens, food preparation areas, hospitals, care homes, offices, airports & hotels.
White Fort Fire Shield supply wide range of colors this system can provide fire protection with tough surfaces providing high levels of hygiene.
White Fort Fire Shield technical team is always developing new protection solutions, working with industry and architects to make buildings safer and more attractive.
30 minutes? | Class O? | 60 minutes? | Class B? | Class 1?
People often ask us why they need to protect structural steel from fire,
After all it is pretty hard to burn. Interestingly, it is known that structural steel begins to soften around 425°C and can lose about half of its strength at 650°C – These are temperatures are very easily reached in a fire and in fact are not much hotter than can be achieved in a modern self-clean domestic oven [many now reach about 500°C ]
Class 1, Class O or the latest Class B, This is achieved using a Fire RETARDANT coating as well as smoke production, toxic fumes, and flaming droplets.
20, 30 or 60 minutes, they are seeking fire RESISTANCE. This is usually supplied by using an intumescent coating.
In some cases a fire resistant coating may need to be overpainted with a fire retardant finish to increase protection and provide a decorative finish.
White Fort Fire Shield supplies both Fire RETARDANT Coatings and Fire RESISTANT Coatings and are happy to give advice and assistance to help you comply with the regulations correctly. The first aim of Passive Fire Protection is to limit the spread of fire and smoke as determined by the local building and fire code. This is done with a fire retardant product. The outbreak of a fire triggers these special coatings to change from apparently normal decorative finishes into an active protection layer applied to a variety of materials and surfaces, including walls, doors, ceilings, flooring and more, they are designed to reduce the spread of flame and reduce dangerous smoke and toxic gasses. The other Passive Fire Protection coating in common use is fire resistance usually in the form of an Intumescent coating. In intumescent paint and coatings (for wood & timber, steel, structural steel and cast iron), the active ingredients swell and char to create a thermal barrier when exposed to heat and flame that keeps the substrate below critical temperatures. In many cases intumescent coatings should be coated with aflame retardant finish that gives off gasses to inhibit the spread of fire and reduce the amounts of smoke and flaming droplets thus further protecting the building, and importantly, the lives of those who may be inside it.
White Fort Fire Shield Asbestos Encapsulating Coating is a Smoke & Flame Retardant Coating that seals rigid, sound asbestos in locations within buildings which are not subject to mechanical damage, concealed or are difficult to access. Also used to seal in isolated asbestos fibers remaining after primary asbestos removal has taken place. Effectively prevents the release of asbestos fibers into the atmosphere by encapsulating them. Permanently bonds residual asbestos fibers, after primary removal, to the surface to which they are attached or upon which they lay.
An anti-graffiti, decorative, flame retardant coating for bare & painted walls. Water-based, high durability two-pack chemically cured coating systems, designed to enable removal of graffiti with graffiti removers. The Bonding Primer Color coat provides excellent adhesion & opacity. The Clear Glaze provides exceptional resistance to oils, inks, crayon, marker and spray paints. 1 coat of each combine to upgrade high-flame spread-risk “multilayer” painted walls to Class O and Class B s1 DO. Flame Retardant Floor Paint Water Based 2K, Use White Fort Fire Shield Flame Retardant Floor Paint to make your workplace
safer!
A heavy-duty decorative flame retardant coating for floors to showrooms, factories, warehouses, workshops, garages, etc. A water-based, high durability two-pack epoxy resin coating, designed to withstand vehicular and fork lift truck traffic. The chemically cured coating provides excellent resistance to oils, inks and other chemicals.
Our Intumescent Mastic is one part intumescent acrylic mastic for sealing gaps around fire doors, window frames and for sealing joints, voids and irregular holes in fire rated structures. The sealant forms a char, preventing the passage of fire and smoke, when exposed to the heat of a fire. Maintains fire integrity when sealing around pipes and cables that penetrate walls. Suitable for flexible walls, rigid walls & floors Tested…In Block Wall, Concrete, Masonry and Plasterboard Partition. In Linear Joints up to 50mm wide tested in large service openings up to 490 x 150mm.
For sealing of linear joints in concrete floors, masonry walls and plasterboard including head of wall details. Around metallic pipes, cable trays, cable bunches, small, medium and large cables.
A water-based, low odor gel for professional
White Fort Fire Shield Thermostrip PRO is non-flammable, safe to handle and store while providing a better quality formula for removing all types of water and oil-based coatings including adhesives like carpet glue. This product is suitable for internal or external use and is non-corrosive and non-ozone depleting which is safer for the environment. Whether you are stripping paint, varnish, aertex, stains or lacquers, White Fort Fire Shield Thermostrip PRO will provide a fast and safe solution to all your stripping requirements.
White Fort Fire Shield Intumescent Acoustic Mastic is a one-part intumescent acrylic mastic for sealing gaps around fire doors, window frames and for sealing joints, voids and irregular holes in fire rated structures. The sealant forms a char, preventing the passage of fire and smoke, when exposed to the heat of a fire. Tested in Block Wall, Concrete, Masonry and Plasterboard Partition
Tested for sealing of linear joints in concrete floors, masonry walls and plasterboard
Sealant remains flexible after installation The mastic has been independently tested in accordance with BS476 and EN requirements. It has good unprimed adhesion to a wide variety of common building substrates, although it is recommended that a small area is tested on unusual substrates
Protecting Steel and Cast Iron is an important part of our business. We offer steel & iron products that give various levels of protection and decorative finish. Often the protection level need is set by Building Control, Insurance Companies or Similar bodies, and we can provide you with advice on how to achieve the required standards with the minimum of fuss. Many of our products are water based making them fast and easy to work with as well as protecting the environment. Our Steel and Iron range includes Paint
strippers, Washes, Primers, Intumescent coatings, as well as specialist top coats in many colors. We can also provide help with estimating and specifying your project if required.
White Fort Thermocoat S is an intumescent solvent-borne coating for the protection of exterior steels and steels exposed during construction. When applied in accordance with the correct film thickness schedule can achieve 30, 60, 90 and 120 minute protection.
A high build which combined exceptional corrosion resistance, maximum grip to steel and previous primers and a permanently ideal surface intumescent paint adhesion. Ideal for use under Thermocoat WI, Thermocoat WO & Thermocoat S intumescents, for a corrosion resistance in normal buildings or as part of a high corrosion resistant system when over coated with White Fort Fire Shield Flame Retardant Paints. Designed for structural steel frames requiring full or partial fire protection with Thermocoat intumescent paint.
Flame Retardant Gloss or Eggshell Finish to protect, seal and decorate over Thermocoat WI, Thermocoat WO & Thermocoat S and 2 coats of Timber coat for 30 or 60 mins. Durable, high opacity, weather-resistant. Maintains Class 0 on primed non-combustible surfaces. Available in NCS, BS 4800 RAL and Metallic: Steel & Gunmetal
White Fort Fire Shield Fire Varnish Overcoat is a part of a varnish system with the option of a clear, tinted or stained finish for Fire Protection of internal timber and timber derivative substrates. The special water-based formula provides durable finish to internal wood. Clear or stained finishes enhance the natural beauty of the wood while fire protecting new and previously varnished surfaces. When exposed to fire, White Fort Fire Shield Fire Varnish expands to create an insulating barrier, protecting timber surfaces from
flames, heat and oxygen and suppressing emission of deadly smoke & gasses. Fire Varnish Overcoat matt or satin provides protection against UV and wear.
A hard, wear resistant Fire Protection AC lacquer for application by professionals using brush, roller or spray. To be used over White Fort Fire Shield Fire Varnish Basecoat for INTERIOR surfaces. Available in Matt or Satin finishes in clear or opaque NCS, BS 4800, BS 381C, RAL and wood stain shades.
White Fort Fire Shield Thermoproof Interior Fluid is a clear, colorless, penetrating Fire Protection with an optional topcoat White Fort Fire Shield Thermoproof Interior Sealer for additional protection against wear, damp & UV damage. In a fire, Thermoproof Fluid reacts with the woods cells to create a flame &
heat resistant barrier. Fire protection fluid is for porous internal wood and for treatment to be effective; it needs to be able to penetrate the wood.
White Fort Fire Shield Thermoproof Exterior Fluid is a fire protection product that penetrates deep into porous bare wood cladding, timber sleepers, fencing and decking. When exposed to fire. Thermoproof Exterior Fluid creates an inert layer within the wood’s surface which insulates the wood from fire, preventing flame spread. A durable clear fire and flame resistant fluid for external and internal wood. Weather resistant. Water-based, non flammable formula enables safe application by untrained and inexperienced users. Thermoproof Exterior Fluid is a penetrating fire proof fluid for wood.
Flamespread Class O and new Class B s1 dO Inherently non-combustible surfaces such as plasterboard, concrete and brick can become a potential fire hazard due to repeated redecoration with conventional paints. Different paint types from a variety of manufacturers have generally been used over many years. In a fire thick layers of old different types of paint or wallpaper tend to de-laminate, rapidly catching and spreading fire, smoke and toxic gasses around a building. Flame retardant paints which emit toxic Antimony-based gasses in a fire have been applied to many buildings. Coat White Fort Fire Shield Wall coat & 1. Coat Wall coat SFR Smoke &Flame Retardant effectively controls flamespread, smoke and toxic gas any type, number and combination of antimony-based and other wall paints 9 or wallpaper. White Fort Fire Shield Certify protected buildings to Class O and new Class b s1dO. Fire Resistance 30 > 60 > 90 > 120 mins. Sometimes concrete, plasterboard or cement board ceilings or walls are not thick enough to achieve the required Fire Resistance time. 3thick or 4 good coats White Fort Fire Shield Wall coat intumescent can be used to add 30 mins Fire Resistance to these surfaces.
White Fort Fire Shield Wall coat can be specified as part of a system to achieve certification of30 & 60 minutes on Plasterboard and Cement board subject to a site survey and issuing of a White Fort Fire Shield Specification. Wall coat forms part of a colored intumescent paint system for interior plasterboard and cement board ceilings and wall surfaces. Sufficient amounts of product need to be purchased and applied to ensure protection is achieved in line with White Fort Fire Shield recommendations to the respective area in question.
To achieve 30 or 60mins + BS EN Class B s1 d0 and Class 0 to unpainted plasterboard or cement board or boards painted with sound, firmly adhering paint please contact White Fort Fire Shield for specification.
White Fort Fire Shield can supply many of its products in a huge range of colors and wood stains. Our woodstain range includes many traditional shades as well as the modern fashionable pale whites.
Fewer coats means exceptional value for money from safe tried and tested products. Our team has spent many years developing products to protect buildings and lives. Part of this development process has been reducing the cost to the user. Our innovative development team uses its expertise to create technically advanced products that protect to the highest standards while using the fewest number of coats. This together with tight cost controls and streamlined production methods enable us to provide some of the most affordable solutions to protect buildings and people from fire.
Once you have completed your project simply complete our straight forward form to obtain your Fire Certificate. The form asks for the area covered, the quantity of product purchased and the fire rating required for each of the White Fort Fire Shield products you purchased. From this information we are able to confirm that you have purchased sufficient product to achieve the required fire rating level/standard you wish to achieve.
Most of our customers need a Fire Certificate to show that the work has been done correctly and the correct product used. White Fort Fire Shield quickly issues a certificate of supply that is universally recognized and accepted.
Backed by decades of experience, all our products are tested to the latest UK and European standards at approved fire test laboratories. White Fort Fire Shield specializes in providing solutions to protect structures and increase safety levels. White Fort Fire Shield protecting more than buildings – saving lives
Mahmood Masoud Street – Al Salama Dist. Jeddah – Kingdom of Saudi Arabia
Ph: 966 50 9376 605
Email : info@whitefort.me
